1. Start > Run > CMD to open a command prompt.
2. Reset TCP/IP stack to installation defaults. Type in the following command in the command prompt and press Enter.
Code:
netsh int ip reset reset.log
3. Reset WINSOCK entries to installation defaults. Type in the following command in the command prompt and press Enter.
Code:
netsh winsock reset catalog
4. Reboot the machine.
Tuesday, November 22, 2011
Wednesday, November 9, 2011
Folders have been turned into Shortcuts
Step 1:
Download the file "AutorunExterminator" from the link below.
Extract it --> Double-click on "AutorunExterminator" --> Plug your flash drive now.
This will remove the autorun.inf files from your flash drive and also from drives.
Step 2:
Click on "Start" -->Run --> type cmd and click on OK.
Here I assume your flash drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
You can copy the above command --> Right-click in the Command Prompt and
paste it.
Note : Don't forget to replace the letter g with your flash drive letter.
Now press "Enter".
Now check for your files in Flash Drive.
AutoRunExterminator
Download the file "AutorunExterminator" from the link below.
Extract it --> Double-click on "AutorunExterminator" --> Plug your flash drive now.
This will remove the autorun.inf files from your flash drive and also from drives.
Step 2:
Click on "Start" -->Run --> type cmd and click on OK.
Here I assume your flash drive letter as G:
Enter this command.
attrib -h -r -s /s /d g:\*.*
You can copy the above command --> Right-click in the Command Prompt and
paste it.
Note : Don't forget to replace the letter g with your flash drive letter.
Now press "Enter".
Now check for your files in Flash Drive.
AutoRunExterminator
Sunday, November 6, 2011
Performance Appraisal System for Teachers (PAST) Form
Performance Appraisal System for Teachers (PAST) in MS Excel Format.
Division of Tarlac official format. With logo and formulas.
PAST
Division of Tarlac official format. With logo and formulas.
PAST
Friday, November 4, 2011
Windows Movie Maker 2.6 for Windows Vista & Windows 7
Microsoft has made version 2.6 of Movie Maker available for download, and it runs on both Windows Vista and Windows 7. While advanced users are likely using a more sophisticated video editing program, there's no denying that Movie Maker is an excellent, full-featured option for the average home user.
MM26
MM26
Thursday, November 3, 2011
Switch AHCI TO IDE
Welcome, I installed Windows 7 with AHCI set from Bios ,but i wanted to use ide mode again because it boots faster and when i set Ide from Bios ,the windows 7 loading screen came up and BSOD (Blue screen of death) with an error code 0x0000005B , i tried the regedit trick by setting in the "HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci" and then in the right pan the START value from 0 i set it to 1 and it supposed to be working but it was a failure, it still did the BSOD.
Here are the pases:
1) I assume you have installed Windows Vista or Windows 7 with AHCI set from BIOS
2) Download my registry fix and simply apply the key, link below.
3) Now the manually regedit part Go to :
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_Msahci
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStor
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStorV
And in these three keys in the right pan you will find a key named "START" change all three (Msahci,iaStor,iaStorV) values from 0 To 1
Now navigate to
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_PciIde
,then change the start value to "0"
Restart your computer, and go to Bios and set from AHCI to IDE, save settings in Bios and restart
Windows will be loading , No more BSOD, windows Vista/Seven will install new Ide drivers andyouu will see in windows device manager that you dont have AHCI drivers anymore and it will prompt for another restart , just restart it.
REGEdit
Here are the pases:
1) I assume you have installed Windows Vista or Windows 7 with AHCI set from BIOS
2) Download my registry fix and simply apply the key, link below.
3) Now the manually regedit part Go to :
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_Msahci
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStor
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_iaStorV
And in these three keys in the right pan you will find a key named "START" change all three (Msahci,iaStor,iaStorV) values from 0 To 1
Now navigate to
HKEY_LOCAL_MACHINE_System_CurrentControlSet_Services_PciIde
,then change the start value to "0"
Restart your computer, and go to Bios and set from AHCI to IDE, save settings in Bios and restart
Windows will be loading , No more BSOD, windows Vista/Seven will install new Ide drivers andyouu will see in windows device manager that you dont have AHCI drivers anymore and it will prompt for another restart , just restart it.
REGEdit
Epson T13 Reset Software
Finally resetter Epson T13 is available on internet. AVG antivirus detected Epson T13 resetter as Virus. Maybe it caused this software has cracked but I think its not a problem, you can disable the antivirus protection on your computer when you want to use this software to reset your Epson printer.
T13 Adjustment Program
T13 Adjustment Program
Labels:
adjustment program,
epson,
reset software,
resetter,
t13
Subscribe to:
Posts (Atom)